DCSIMG

HDMIシンク・テスト用推奨機器

  Recommended Equipment Quantity
オシロスコープ DPO70804/B型、DPO71254/B型、DPO71604/B型、またはDPO72004/B型(Opt. 2XL付)
For HEAC:
DSA70804/B型、DSA71254/B型、DSA71604/B型、またはDSA72004/B型
1
ソフトウェア Opt. HT3 - HDMIコンプライアンス・テスト・ソフトウェア
1
HDMIテスト用プローブ P7313SMA型差動SMAプローブ – すべての差動およびシングルエンド測定で使用 2または4
データ・タイミング・ジェネレータ DTG5334型(DTGM30型モジュール×3、DTGM32型モジュール×1) 1
データ・タイミング・ジェネレータ Tektronix P7330 for Tektronix DPO/DSA70000/B Series Digital Oscilloscope
– Tektronix 016-1884-00 Square Pin Adapter
– Tektronix P6247/P6248/P6330 for Tektronix DPO/DSA70000/B Series or DPO7000 Series
– Tektronix 016-1884-00 Square Pin Adapter for P6330
–Tektronix TCA-BNC Interface Adapter for DPO/DSA70000/B Series
– Tektronix TPA-BNC Interface Adapter for DPO7000 Series
TDP1000/1500/3500 for Tektronix DPO7000 Series Digital Oscilloscope
1 required
任意波形/ファンクション・ジェネレータ ">AFG3102型任意波形/ファンクション・ジェネレータ、あるいはそれより上位の機種 1
TDRシステム DSA8200型、80E04型モジュール×1
– Tektronix TCA-BNC Interface Adapter for DPO/DSA70000/B Series
– Tektronix 196-3463-10 Y-lead Adapter
– Tektronix TPA-BNC Interface Adapter for DPO7000 Series
– Tektronix TAP1500 for Tektronix DPO7000 Series Digital Oscilloscope
– Tektronix 196-3463-10 Y-lead Adapter
2 required
HEAC Signal Generator AWG5012B with opt 01/
AWG5014B with opt 01
/
AWG7102 with opt 01/
AWG7122B with opt 01,06,08/
AWG7051 with opt 01
AWG7051B with opt 01,06,08/
AWG7052 with opt 01/
AWG7052B with opt 01,06,08/
AWG7061B with opt 01,06,08/
AWG7062B with opt 01,06,08/
AWG7064B with opt 01,06,08
1 ea.
フィクスチャ ET-HDMI-TPA-S or ET-HDMI-TPA-STX – Type A HDMI Fixture 1 set each
ET-HDMIC-TPA-S or ET-HDMIC-TPA-STX – Type C HDMI Fixture 1 set each
TF-HEAC-TPA-KIT – HEAC Fixture KIT 1 set
TF-HDMID-TPA-KIT – Type D ( mobile) Fixture Kit with Type D HEAc Capability 1 set
TF-HDMIE-TPA-KIT – Type E ( Automotive) Fixture Kit 1 set
TF-HDMI-TPA-CE – EDID Board with EDID EEPROM and Flat EDID Cable 1 set
Bias Tee for Non DS solution Bias-Tees to shift AWG7102/AWG7122B direct clock output to TMDS levels. Order individually as ZX85-12G-S+ from Mini-Circuits 2
Cables Tektronix SMA cables (174-1428-00) 12
Adapter BNC to SMA Adapter (015-0554-00) 1
Interface NI-GPIB-USB – A/B/HS with Driver Software from National Instruments. Type B/HS is recommended for use with DPO/DSA70000 Series oscilloscopes. 1
Power Supply Power supply 5V 1
Filters Transition Time Converters from Picosecond Pulse Labs

Ordering information:
Clock Speed Rise Time Filter Part No.
27 MHz 430 ps 5915-100-430PS
74.25 MHz 430 ps 5915-100-430PS
148.5 MHz 200ps 5915-100-200PS
222.75 MHz 120ps 5915-100-120PS
335.00 MHz   No filter required
6 sets


For testing with ALL CABLE EMULATORS used in Jitter Tolerance Test (Test ID 8-7) using direct synthesis setup. Also supports Sink Min Max Differential Swing test, Sink Intra Pair Skew test, Sink Deep Color test

  Recommended Equipment Quantity
Oscilloscope DSA70804/B, DSA71254/B, DSA71604/B or DSA72004/B ; or DPO70804/B, DPO71254/B, DPO71604/B, or DPO72004/B with Opt. 2XL For HT3 and HT3-DS 1
Arbitrary Waveform Generator ">Tektronix AWG7122B with option 01, 06 and 08 (for Sink and Cable tests)

*Note: Sink test automation requires an Ethernet Hub or GPIB
2
任意波形/ファンクション・ジェネレータ ">AFG3102型任意波形/ファンクション・ジェネレータ、あるいはそれより上位の機種 1
HDMI Direct Synthesis Accessory KIT Consists of 8 ea. Bias Tees, 8 ea. TTC120PS filters, 8 ea. LPF, 8 ea. 6dB Attenuators, 4 ea. GPIB Cables, 16 ea. SMA cables, 4 ea. BNC cables,1 ea BNC-T Adopter 1 set
DC Power Supply To Connect 5V to the +5V Power (P_5V) and DDC/CEC Ground (P_GND) on TPA-P 1
Fixtures ET-HDMI-TPA-S or ET-HDMI-TPA-STX – Type A HDMI Fixture 1 set each
ET-HDMIC-TPA-S or ET-HDMIC-TPA-STX – Type C HDMI Fixture 1 set each
TF-HEAC-TPA-KIT – HEAC Fixture KIT 1 set
TF-HDMID-TPA-KIT – Type D ( mobile) Fixture Kit with Type D HEAc Capability 1 set
TF-HDMIE-TPA-KIT – Type E ( Automotive) Fixture Kit 1 set
TF-HDMI-TPA-CE – EDID Board with EDID EEPROM and Flat EDID Cable 1 set
Software Opt HT3 – HDMI Compliance software and HT3-DS – HDMI Direct Synthesis option for HT3 1 set